Picture of LED02 work light

We present our powerful and compact LED02 work light.
These lights are extremely versatile and have many applications. Their small size, high light output and wide operating voltage range make them ideal for use by Tradies, Farmers, Campers, Boaters, Quad Bikers and most types of serious or recreational users.
They also make great reversing or tray lights for your Ute!

LED lights use solid state electronic components to convert electrical current into bright useable light. By careful electronic control of the current flowing through the LED it can be made to produce its maximum light output for long periods of time while requiring a minimum of power. This electronic control allows these lights to operate at full brightness from 8 Volts to 30 Volts. Full power output is maintained at low voltages, this makes them ideal for long cable runs on farm machinery.

These lights are constructed of cast aluminium with a tough, epoxy bonded plastic lens and are supplied with a rugged stainless steel mounting bracket and nylon locking nuts.

Light output from the 8 high power LEDs is evenly spread over a wide area using a free formed aluminised reflector which offers a very high optical efficiency compared to lens type diffusers.

We carry a full range of spare parts and we offer a repair service should this ever be required. All our lights have a 12 month warranty.

Light source type = 8 x 3Watt high power LEDs.
Colour temperature = 6000K - Bright white.
Operating voltage range = 8 to 30 Volts at full output power.
12 Volt current = 1.4 Amps.
24 Volt current = 0.73 Amps.
Connection = 50cm of 3mm two core wire, no terminals.
Wide flood beam only.

Width = 141mm
Height of light head = 90mm
Depth = 65mm
Mounting depth = 35mm from rear surface to centre of mounting bolt.
Height from mounting surface = 120mm
Mounting bolt = 8mm diameter with nylock nut.

Priced at $90 inc.GST each for a single light.

We also offer discounts for bulk orders.

Please contact us at sales@sparkit.com.au for prices.